3Com Corporation
                           Patch Release Note
	           10/100 Fast Ethernet 3C905B NICs


Patch Information
-------------------
Use this patch only 3C905B NIC will not install properly in 
Windows 98 using EtherDisk version 3.x. This inf patch will fix the
symptoms below.

Symptom:
---------

After the card is installed, and after reboot, in the Control Panel -
Network applet, the system displays a window that says,

   " You have selected a Plug and Play adapter. Please turn off
   your machine and install the adapter, then turn your machine on
   again."

Even after you repeatedly follow the message suggestion the card will
not install.

In the  Control Panel - System - Device Manager the network
adapter properties indicate that the card is disabled.
In the General tab the Device Status says,

    " This device is disabled code(22).
      Click Enable Device to enable this device."

Any attempt to enable the card and reboot has no effect.  The card remains
disabled in Device Manager. Also, the device driver type and version are
not available in Device Manager.

How to apply this patch.
------------------------

1. Remove the w95el90x.inf file on Disk2 of the EtherDisk 3.1 and copy this
inf patch to the EtherDisk as w95el90x.inf.

2. Reinstall the NIC drivers using Disk2 of EtherDisk 3.1.

--------------------- end -------------------------------------------------