The fix is shipped as file IBM.HHOP801.UK81498
The fix has rework (build) date 2012248 (4 Sep 2012)
The following fixes are prerequisites for this fix:
These prerequisites can be downloaded from the Developer for System z Recommended Fixes page, if not included as file IBM.HHOP801.<prereq>.
Steps required to install the fix:
A sequential data set must be allocated on the z/OS system to receive the fix that you will upload from your workstation. You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//ALLOC EXEC PGM=IEFBR14 //* //UK81498 DD DSN=hlq.IBM.HHOP801.UK81498, // DISP=(NEW,CATLG,DELETE), // DSORG=PS, // RECFM=FB, // LRECL=80, // UNIT=SYSALLDA, //* VOL=SER=volser, //* BLKSIZE=6160, // SPACE=(TRK,(232,40)) //*
Upload the file in binary format from your workstation to the z/OS data set. On a Windows system, you can use FTP from a command prompt to upload the file. In the sample dialog shown below, commands or other information entered by the user are in bold, and the following values are assumed:
| User enters: | Values |
|---|---|
| mvsaddr | TC P/IP address of the z/OS system |
| tsouid | Your TSO user ID |
| tsopw | Your TSO password |
| d: | Your drive containing the fix files |
| hlq | High-level qualifier that you used for the data set that you allocated in the job above |
C:\>ftp mvsaddr Connected to mvsaddr. 220-FTPD1 IBM FTP CS %version% at mvsaddr, %time% on %date%. 220 Connection will close if idle for more than 60 minutes. User (mvsaddr:(none)): tsouid 331 Send password please. Password: tsopw 230 tsouid is logged on. Working directory is "tsouid.". ftp> cd .. 250 "" is the working directory name prefix. ftp> cd hlq 250 "hlq." is the working directory name prefix. ftp> binary 200 Representation type is Image ftp> put d:\IBM.HHOP801.UK81498 200 Port request OK. 125 Storing data set hlq.IBM.HHOP801.UK81498 250 Transfer completed successfully 12905280 bytes sent in 0.28 seconds ftp> quit 221 Quit command received. Goodbye.
++HOLD(UK81498) SYS FMID(HHOP801) REASON(DOC) DATE(12248)
COMMENT
(****************************************************************
* Affected function: console messages *
****************************************************************
* Description: new message, FEK212E *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: n/a *
****************************************************************
This maintenance defines a new console message
FEK212E = Invalid {0} command option: {1}
The message can be shown after issueing a faulty formatted
operator command.).
++HOLD(UK81498) SYS FMID(HHOP801) REASON(ACTION) DATE(12248)
COMMENT
(****************************************************************
* Affected function: configuration problem analysis *
****************************************************************
* Description: updated debug information gathering tool *
****************************************************************
* Timing: pre-APPLY *
****************************************************************
* Part: FEK.SFEKSAMP(FEKLOGS) *
****************************************************************
This maintenance updates the debug information gathering tool,
FEKLOGS.
- added support to collect data for multiple userids
If you have customized this file, it is advised to back it
up before proceeding with SMP/E Apply.
****************************************************************
* Affected function: configuration problem analysis *
****************************************************************
* Description: updated debug information gathering tool *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: FEK.SFEKSAMP(FEKLOGS) *
* [FEK.#CUST.JCL(FEKLOGS)] *
****************************************************************
This maintenance updates the debug information gathering tool,
FEKLOGS.
- added support to collect data for multiple userids
Redo your customizations, if any, after applying this
maintenance.
****************************************************************
* Affected function: TSO commands service *
****************************************************************
* Description: new environment variable *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: /etc/rdz/rsed.envvars *
* [/usr/lpp/rdz/samples/rsed.envvars] *
****************************************************************
This fix updates the sample rsed.envvars by adding the
following optional directives:
#_RSE_JAVAOPTS="$_RSE_JAVAOPTS -DRSE_DSICALL=TSO"
Method used to collect data set information. By default, the
service uses the same TSO/ISPF Client Gateway infrastructure
used for TSO commands issued by the user. Uncomment and
specify TSO to use an alternative, less resource-intensive,
method to collect data set information. Note that this
alternative method adds additional prerequisites:
* FEK.SFEKLOAD(FEKDSI) must be in LINKLIST or STEPLIB (defined
in rsed.envvars)
* the REXX runtime library (REXX.*.SEAGLPA) must be in LPA,
LINKLIST, or STEPLIB (defined in rsed.envvars)
Also note that this variable is not honored when APPC is used
instead of ISPF's TSO/ISPF Client Gateway to support the TSO
Commands service.
Add these directives to your active rsed.envvars (by default
located in /etc/rdz) if you want to use them.
****************************************************************
* Affected function: CA Endevor(R) SCM integration *
****************************************************************
* Description: new CRABCFG (batch action) directives *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: FEK.#CUST.PARMLIB(CRABCFG) *
* [FEK.SFEKSAMP(CRABCFG)] *
****************************************************************
This service introduces new batch action directives for the
CRABCFG configuration file (CA Endevor(R) SCM batch actions).
# batch action JCL members within SKELETON-DD
ADD-ELEMENT = CRABATCA
GENERATE-ELEMENT = CRABATCA
MOVE-ELEMENT = CRABATCA
DELETE-ELEMENT = CRABATCA
RETRIEVE-ELEMENT = CRABATCA
SIGNIN-ELEMENT = CRABATCA
PRINT-ELEMENT = CRABATCA
PRINT-MEMBER = CRABATCA # new directive
****************************************************************
* Affected function: CARMA *
****************************************************************
* Description: CA Endevor(R) SCM VSAM update *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: SFEKVSM2(CRA0VCAD) *
* Part: SFEKVSM2(CRA0VCAS) *
****************************************************************
This maintenance updates the CRADEF and CRASTRS VSAM data sets
used by the Developer for System z interface to CA Endevor(R).
* support PRINT-MEMBER API call
To apply these changes to your active VSAM data sets, resubmit
the customized SFEKSAMP(CRA$VCAD) and SFEKSAMP(CRA$VCAS).
****************************************************************
* Affected function: CA Endevor SCM(R) interface *
****************************************************************
* Description: updated CA Endevor support *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: FEK.SFEKPROC(CRANDVRA) *
****************************************************************
This fix updates sample member SFEKPROC(CRANDVRA):
* DD SPCLLIST: LRECL(80) -> LRECL(256)).
SMP/E ACCEPT the prerequisites to facilitate an easy backout of the fix, if required.
SMP/E RECEIVE and APPLY the fix.