README.TXT File	README.TXT File
README file for TDK MusicCard	
         ** Windows 95 ** *
(C) Copyright TDK Corp. 1996

  This document, the following supplementary information about TDK MusicCard has been described.TDK MusicCard
We encourage you to read them carefully.

************************************************** **************************** ******************************************************************************
[1] application installer (TDKSETUP for W95)
[2] TDKMUSIC.INI
Notes on using [3] WAVE Config
[4] for the "Advanced Settings"
[5] polyphony [ 5] 
************************************************** **************************** ******************************************************************************

[1] application installer (TDKSETUP for W95) [ 1] (TDKSETUP  for  W95)
        Application installer (TDKSETUP for W95)(TDKSETUP  for  W95)
        , Then the settings for operating the TDK MW-8232.TDK  MW-8232 Its configuration
        After the driver installed for the constant, always install applications
        Start (TDKSETUP for W95), line a variety of settings error(TDKSETUP  for  W95)
        Please do it. If the configuration that has not been made, the disabled to work
        May result in the case.

[2] TDKMUSIC. [ 2] TDKMUSIC. INI INI
        If there is a problem in recording / playback of WAVE, the following is a Windows95 Windows95WAVE/
        May be improved by changing the settings.

        [Environment] [Environment]
         CPUTYPE = n CPUTYPE=n

                    n: 0/1 n:0/1
                        Less than 0:486 DX4 0:486DX4
                        Or more Pentium 75Mhz: 1 1:Pentium  75Mhz

        Depending on the model, you may not be able to work well with this criterion.
        In addition, the application installer, but will add the above settings,
        Speed of memory conditions during the installation of your model, the hard disk,
        Etc. by the state of the application running in the background, the setting
        In some cases, the value is not correct.
        Nothing more Pentium 90Mhz, less memory on your device modelPentium  90Mhz
        If it is recommended that you adjust, such as setting to 0.0

        In addition, if you do not want to use the TDK MW-8232 is about WAVE,WAVETDK  MW-8232
        It does not matter in the setting of one. 1

Notes on using [3] WAVE Config [ 3] WAVE Config
        If you select the Playback Method for WAVE, in the "TDK MusicCard Control Panel" WAVE"TDK MusicCard"
        Please keep the sound clear all fonts are loaded.
        Also, please keep to the "Using the WAVE" always in the "Advanced Settings"."""WAVE"

[4] for the "Advanced Settings" [ 4] ""
        Of "TDK MusicCard Control Panel" in the "advanced", the TDK MusicCard "TDK MusicCard"""TDK MusicCard
        You can prohibit the use of WAVE. WAVE "Using the WAVE" if, Musi "WAVE"Musi
        It uses a few percent of memory in the cCard, large sound font cCard
        If you do not have to be loaded too, is to "Do not use the WAVE" to set"WAVE"
        You may be able to load.
        Also, if you are using a non-driver as a WAVE driver TDK MusicCardWAVETDK MusicCard
        Please "do not use the WAVE" in the configuration. "WAVE"

[5] polyphony [ 5] 
        32 voice polyphony is possible in TDK MusicCard, usually to make AUX 2 voice TDK MusicCard322AUX
        Has been for. If you mute the AUX in "TDK MusicCard mixer" is this "TDK MusicCard"AUX
        You can also use to play two MIDI voice. 2MIDI
        Note: Depending on the tone, because there is something you use a two-voice in a sound, 32 notes simultaneously: 1232
            You may not be able to pronounce.
            When re-recording of WAVE is to be used for re-recording of about 10 voice WAVE, MIDI playback WAVE10WAVEMIDI
            Number of voices will be available in 20 and about.20