2400 BPS Pocket FaxModem (250-3105) Features Faxback Doc. # 5760 This pocket-size faxmodem combines a 2400/1200/300 BPS Hayes-compatible modem with 9600/7200/4800/2400 send fax capability and 4800/2400 receive fax capability. It uses a Rockwell Class 1 faxmodem chip for superior performance, and plugs into the serial port of any computer, including laptops and notebooks. Thanks to its small size and light weight, it is extremely transportable. GENERAL DESCRIPTION This faxmodem is a Hayes and CCITT V.22 bis/V.22 compatible auto-dial/auto -answer modem that provides all the fallback and operation requirements for asynchronous data communications at 2400, 1200, and 300 BPS. It supports the current Hayes command for asynchronous operation, including all S register, AT commands, and dial commands. It also supports the V.27ter and V.29 fax protocols for sending a fax at 9600, 7200, 4800, or 2400 BPS and receiving a fax at 4800 or 2400 BPS, and can automatically sense and adjust to the speed of a slower fax machine. Settings and phone numbers can be saved to the faxmodem's non-volatile memory. Special features include superior call progress tone detection, a high -power micro speaker and amplifier with software volume control for better call monitoring, adaptive equalization, MOV varistor lightning protection, and automatic low power consumption when not in use. The faxmodem supports the Rockwell Protocol Interface, to facilitate efficient software implementation of error correction (V.42, MNP2-4) and data compression (V.42bis, MNP5). With appropriate software, this faxmodem will perform these functions as well as modems that do so via hardware. KEY FEATURES -Supports operation for the following protocols: CCITT V.22 bis (2400 BPS International Standard) Bell 212A (1200 BPS U.S. Standard) CCITT V.22 (1200 BPS standard used in most countries outside the U.S.) Bell 103 (300 BPS U.S. standard) CCITT V.27ter (4800/2400 BPS Fax Standard) transmit and receive CCITT V.29 (9600/7200 BPS Fax Standard) transmit -Adaptive Equalization -Automatic speed selection/Automatic fallback to slower speed -Facsimile is Group III, EIA-578 Service Class 1 -Data/fax handshake discriminator -Full and half duplex operation -Auto-originate and auto-answer modes -Non-volatile memory -Forced originate and answer modes -Auto-reverse mode -40-character command buffer for chaining commands -Automatic Diagnostics: Power-up Self Test Local and Remote Analog Loopback Local and Remote Digital Loopback -Dialing Capabilities: Autodial in tone, pulse, or a combination of tone and pulse Reverse mode dialing Dials up to 36 digits Call progress tone detection Manual dial override Programmable number of rings before answer -Automatic low power consumption when not in use (smc-01/11/94)